MeanWell 1000W DC/AC Inverter True Sine Wave   

INPUT: 21.0 -30 VDC       

OUTPUT: 230 VAC / 50 HZ

Features:

• True sine wave output (THD<3%)
• High surge power up to 2000W
• High efficiency up to 92%
• Power ON-OFF switch
• Standby saving mode can be selected
• Front panel indicator for operation status
• Thermostatically controlled cooling fan
• Battery low alarm, battery low shutdown, over voltage, over temperature, output short, input polarity reverse, over load protections
• Built in cooling fan ON-OFF control
• Optional monitoring software
• Output AC voltage selectable by setting button
• 100 ~ 120VAC Output version available
• Worldwide AC output receptacle options available

TS-1000 is a high performance true sine wave DC/AC power inverter that uses high frequency circuit topology. With high efficiency up to 92% this dc/ac inverter can provide 1000W continuously and peak load of 1150W for 3 minutes, 1500W for 10 seconds or 2000W surge power for 30 utility cycles.

Rated Power: 1000W

Maximum Output Power: 1150W for 180 sec./1500W for 10 sec./surge power 2000W for 30 cycles

Output Frequency: 230VAC 50±0.1Hz 50/60Hz selectable by setting button

Waveform True sine wave (THD<3%) at rated input voltage

AC Regulation: ±3.0%

Saving Mode Load:

Front Panel Indicator Operation status: Battery voltage level, output load level, saving mode, fault and operation status.

No Load Dissipation:

Input Off Mode Current Draw:<1mA

Battery Types: Open & sealed Lead Acid

Input Battery Polarity Protection: By internal fuse open.

Over Temperature Protection: Shut down o/p voltage, re-power on to recover; by internal RTH1 detect power MOSFET.

Output Short Protection: Shut down o/p voltage, re-power on to recover.

Over Load Protection: 105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec. Shut down o/p voltage, re-power on to recover.

GFCI Protection Optional on 110VAC models, Type F only

Working Temperature: 0 deg.C – 40 deg.C @ 100% load

Working Humidity: 20% ~ 90% RH non-condensing

Vibration: 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes

Safety Standards: EN60950-1

Withstand Voltage: Bat I/P-AC O/P:3.0KVAC AC O/P- FG:1.5KVAC

Isolation Resistance: Bat I/P-AC O/P,AC O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH

EMI Conduction & Radiation: Compliance to EN55022 class A, 72/ 245/ CEE, 95/ 54/ CE, E-Mark

EMS Immunity: Compliance to EN61000-4-2,3,8 ENV50204

Dimensions: 293 x 184 x 70mm

Packing Weight: 4.3kg